How to connect undercounter water filter to sprayer hose supply instead of h2O line

klread Posts: 1, Reputation: 1

New Member

Jul 14, 2012, 03:43 PM

How to connect undercounter water filter to sprayer hose supply instead of h2O line

I have a new Honeywell undercounter water filter to install. I do not want to filter all of my cold water-just use the filtered water faucet for drinking water. How can I connect the supply water line to the current supply for the sprayer hose? The water lines that came with the filter are much smaller than the flexible hose for the sprayer.

Check out some similar questions!

Where do I install a vacuum relief valve on a cold water supply line for my H2O tank? [ 13 Answers ]

In order to gain occupancy, an inspector informed me that I need to install a vacuum relief valve on the cold water supply line for my hot water tank. I purchased a vacuum relief valve and the installation instructions that came with it states that it should be installed on a horizontal line above...

Trying to connect sprayer to the water supply undersink-need to convert screw to plug [ 0 Answers ]

Hi I bought a new kohler kitchen faucet to replace my old one. It is the same model and it a single arm unit with a pull out sprayer. The new model is cheaply made and the sprayer hose is made of cheap black plastic while my old sprayer has a nice stainless steel hose. I want to keep the old...

Connect Sprayer Hose.. But can't Find Connection Diverter! Do I even have one? Jeesh. [ 2 Answers ]

I'm trying to attach my kitchen sink sprayer but I can't tell if there is that option considering I can't see the diverter on the main water supply line. What does the diverter look like/how can I tell if I even have one? My low rise jeans allow my crack to show enough when I bend over so why...

Disconnecting Faucet Sprayer Hose From Supply Line [ 8 Answers ]

Hello, I'm trying to disconnect the hose of my faucet sprayer from the faucet and the location of the connection is right in between the cold and hot feeds and the basin of the sink. Basically, there is no room to get even a basin wrench in there. I believe it's a compression fitting which...

How do you connect the kitchen sprayer hose to the copper pipe under the sink? [ 1 Answers ]

The kitchen sink has a hole on top for installation of a sprayer. It also seems to have an independent copper pipe with a valve underneath however, there are no threads on this copper pipe for threading a tube from the top to the copper pipe. The copper pipe is capped.

View more questions Search

Check out some similar questions!

Add your answer here.