Ask Experts Questions for FREE Help !
Ask
    GeoW's Avatar
    GeoW Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 25, 2012, 10:00 AM
    What is the oil capacity for Briggs engine 31P777
    What is the oil capacity for Briggs engine 31P777
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Jul 14, 2012, 01:43 PM
    Hi,
    A bit over 1 1/2 qts without a filter and about 5 oz more with.
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Oil capacity Briggs and Straton Push mower 4.5 hp [ 4 Answers ]

How much oil do I put in a Briggs and Straton Bolens push lawn mower? Model 11A-084E765 4.5hp Verify- the best type of oil is straight 30 weight, right?

Briggs 31p777 won't turn past compression, why? [ 3 Answers ]

Engine turns over extremely hard, have to use heavy jumper cables on my truck and a battery jump box, both, to get enough juice to turn it past the compression point. I am on the 3rd starter... starts and runs fine if I can get enough power to turn it over. Any suggestions? It's a briggs model...

Oil capacity of Briggs & Stratton 402707 opposed twin? [ 3 Answers ]

Hi, Does anyone know the Oil capacity of the Briggs & Stratton 402707 16HP opposed twin? Also, the engine is making a rattling noise like the fan is touching the inside of the shroud or the shroud itself is rattling around. Has anyone had experience taking one of these beasts partially apart?...

Briggs & Stratton 16-HP Vanguard V-Twin oil capacity [ 3 Answers ]

I recently acquired a lightly used Briggs & Stratton 16-HP Vanguard V-Twin powered 10KW generator, of course, with no manual. Fired it up once and all was fine. Decided it needed an oil and filter change. Looked online for oil capacity and found one place that stated 3 quarts for this...

Oil capacity 3.7 v6 engine [ 1 Answers ]

I did the first oil change in my 2008 dodge nitro and it reads a quart low. It's a 3.7 v6 and calls for 5 quarts of oil with the filter. The dealer ship has been no help. Any ideas?? I have drained it and check level several times.


View more questions Search