Ask Experts Questions for FREE Help !
Ask
    albeezy89_vi's Avatar
    albeezy89_vi Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 13, 2012, 04:45 PM
    1992 honda accord tcm/tcu burnt but still drives and shifts... help !
    Hi I have an 92 accord lx auto it starts up fine it drives but the d4 starts blinking after like 5 minutes it shifts hard and drags but goes in to all gears my tmc/tcu is burnt inside I can take the car out of park with out it being on and it starts in neutral I went to a mechanic shop and they said it's a problem inside and it would be like a grand to fix but I find it weird that its still shifting in all gears.. I thought about changing the vss and buying a new tcu 1st
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jul 13, 2012, 04:55 PM
    . Check for codes.

    . Change the transmission fluid, if it hasn't been done in 30,000 miles.

    . Replace the TCM, if it really appears it's toast.

    If the problem persists, the ATX likely needs rebuilding or replacing.
    albeezy89_vi's Avatar
    albeezy89_vi Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jul 13, 2012, 05:05 PM
    Quote Originally Posted by TxGreaseMonkey View Post
    . Check for codes.

    . Change the transmission fluid, if it hasn't been done in 30,000 miles.

    . Replace the TCM, if it really appears it's toast.

    If the problem persists, the ATX likely needs rebuilding or replacing.

    I had a transmission flush not to long ago.. I can see where the tcm is burnt and leaked
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #4

    Jul 13, 2012, 05:32 PM
    Try checking for codes. If there's a major problem retrieving codes, then replace the TCM. That should give you a good idea of what you may be up against.
    albeezy89_vi's Avatar
    albeezy89_vi Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Jul 13, 2012, 05:33 PM
    Quote Originally Posted by TxGreaseMonkey View Post
    Try checking for codes. If there's a major problem retrieving codes, then replace the TCM. That should give you a good idea of what you may be up against.
    OK thank you.. oh what is the atx ?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #6

    Jul 13, 2012, 05:35 PM
    ATX = automatic transmission
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

92 Honda Accord TCM? [ 10 Answers ]

I started having problems with my accord's auto tranny not shifting in D4/the light staying on D4 and having to shift manually through the gears so as not to damage the clutch. After looking/asking questions for a while, I found out that it was probably the Transmission Control Module/Unit...

92 honda accord speedometer and trans s shifts weird [ 1 Answers ]

Transmission shifts just however it wants and speedometer wii jump around just before crazy shifting begains speedometer will hang up or not work at all what connects the two

1992 Accord TCM location [ 1 Answers ]

Where is the transmission control module located on a 1992 Honda Accord?

Tcu / tcm in 1992 honda civic exv a/t [ 1 Answers ]

I am recently advised that my 1992 Honda Civic EXV, 4-door sedan, 4-cyl 1600cc SOHC VTEC engine, automatic transmission DOES NOT have a separate Transmission Control Unit (TCU) / Module (TCM). Looking at the wiring diagram for the Engine Control Unit (ECU) / Module (ECM) I see that it connects...

I have a 1992 honda accord and would like to put a 1996 honda accord engine and trans [ 2 Answers ]

I got a 1992 honda accord and would like to put a 1996 honda accord engine and trans in it. Would it be possibly.

View more questions Search