Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Briggs and stratton 18.5 ohv intek service manual
[ 1 Answers ]
The mower runs great and has 120# cranking compression.. After 3-5 minutes starts smoking.. hot or cold.. I thought oil ring. Just ask expert said no it's the intake valve seal.. replaced it and still smokes same.. breather and exhaust not pluged. I feel it has to be oil ring or cracked piston....
How to dismantle a briggs & stratton 18.5HP Intek engine
[ 2 Answers ]
Our Briggs & Stratton (Craftsman) rider mower quit working a few weeks ago. Sears came out and while they do not know what exactly is wrong with it, as it does not crank or turn they want to fit new engine or re-cond. One no less than $1000! My husband is trying to work out what caused it to die. ...
Briggs & Stratton 18.5 HP OHV Intek Plus - Single Cylinder
[ 8 Answers ]
Help! I just replaced the short block on this motor and I cannot get it to run. I've adjuseted both intake and exhaust valves to 0.004 at 1/4 turn past TDC and no luck. It cranks over and kicks back on the compression stroke with smoke out the carb. So far it has not kicked over at all yet. What...
17 HP OHV Briggs& Stratton Engine
[ 2 Answers ]
Will this engine run without a battery once jump started?
Briggs and Stratton Vanguard OHV Engine
[ 1 Answers ]
I have a new Briggs and Stratton 8000 watt generator powered by a Vanguard 15 hp overhead valve engine.Since it came from the factory it has a popping sound from the muffler as it runs. It seems as though there is a misfire. The spark plug has been changed and the spark is in spec. Service dealers... View more questions Search
|