Ask Experts Questions for FREE Help !
Ask
    jlullery's Avatar
    jlullery Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 11, 2012, 07:41 PM
    Kenmore dryer 90 plus series does not heat on high
    My dryer works on med heat but not high heat, what could be wrong?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jul 12, 2012, 09:55 AM
    I would think that the dryer is too dirty to run on high heat - it would overheat. You will have to tear it down and clean every air duct. Anything you miss will keep it from working. If you have thermistors you will have to test them, too. Here are some manuals: https://dl.dropbox.com/u/8010163/Ken...%20Manuals.zip
    If you tear it down you should have a new belt and some white lithium grease to grease all bearings and support rollers.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My series 90 kenmore dryer won't heat? [ 1 Answers ]

My series 90 kenmore dryer won't heat?

Kenmore 80 series dryer no heat [ 0 Answers ]

No heat what can be the problem

Kenmore series 80 dryer won't heat [ 0 Answers ]

Everything works but it won't heat. Where do I look? I took the back cover off.

Kenmore series 80 dryer no heat [ 1 Answers ]

I have a kenmore series 80 gas dryer that has no heat when loaded. When emtpy it seems to make good -- normal heat. It does make a clicking noise -- like it is trying to light for about 15 seconds then stops noise but still no heat. Thanks for any help!! Bob

View more questions Search