| 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
New ceiling light has black, white, red and ground wire.  Ceiling wires are... 
 [ 5 Answers ]
 Black, white and ground. What do I do with the extra red wire in the new light kit? I didn't have a ceiling fan nor do I want one. Thanks. 
I am installing a standard ceiling light where a wall controlled ceiling fan had been
 [ 2 Answers ]
 The ceiling box had a black wire, a white wire, a red wire, & a bare ground wire. I connected the black to black, white to white, ground to the ground on the fixture strap, & ignored the red wire. The light now works but not with the flip switch. It works with the round switch when it is turned to... 
Installing ceiling fan with 3 hot 3 neutral and 3 ground coming from the ceiling HELP
 [ 4 Answers ]
 When installing a ceiling fan, there are 3 hot, 3 neutral and 3 ground wires coming from the ceiling when attaching all black total of 4 all white total of 4 and all ground total of for the breaker trips, then when connecting only 2 hot together 2 neutal and 2 ground the fan and light do not work.... 
My house has cracks in walls and ceiling; one ceiling crack is 1/4" wide.
 [ 4 Answers ]
 The house is on cement slab, about ten years old. 
Removing Hugger ceiling fan
 [ 1 Answers ]
 I have a hampton bay hugger ceiling fan. It was installed by a 'person' who crossed the fan and light wires, so I have to take it down to switch the wires; the light is three way with the downstairs hallway. :mad: I do not have the instuctions. I have removed the housing and had tried to... View more questions Search 
 |