Magnito setting

lenamaree Posts: 1, Reputation: 1

New Member

Jun 10, 2012, 08:42 AM

Magnito setting

What is the setting for the maginto on a murray lawnmower

crigby Posts: 4,343, Reputation: 107

Outdoor Power Equipment Expert

Jul 8, 2012, 05:24 PM

Hi,
Air gap is 0.010" and a business card works well.
Peace,
Clarke

Add your answer here.

Check out some similar questions!

I changed a tool setting and it returns to old setting? [ 2 Answers ]

After I changed my tools setting to 100% zoom it returned back to the 125% picture. How do I keep the 100% setting%

Cold setting produces heat while heat setting does the same. Need cold air. [ 6 Answers ]

Just installed a honeywell rth221 and when placed in the heat position, it heats and when in the cool position, it heats. Why can I not get cold air? Old thermostat was a lenox with R, Y1, G, O, W1, C, New thermostat has only Y G on one side and Rh, Rc, and W on other with removable jumper...

12.5 briggs and s that lost spark magnito replaced and no spark [ 3 Answers ]

I have a Deutz-Allis 613 lawn tractor with a B/S 12.5 horizontal engine. When I got it. The engine would run fine unless it was under a load... if the choke was pulled out half way the engine wouldn't stall. I replaced the drive belt and then the mower belt sharpened the blades and the tractor...

Magnito gap [ 1 Answers ]

I have been repairing my Murray 17 rider. Does any one know how much gap I need for the magnito so that the sparkplug gets its spark?