Ask Experts Questions for FREE Help !
Ask
    buzzardman's Avatar
    buzzardman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 4, 2012, 01:34 PM
    Mower deck problems
    I have a johndeere lt160 with a 42c deck. I installed new spindels on the deck and know one blade is higher than the other with new blades. Is there a correct way to do this?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 15, 2012, 12:02 PM
    Hi,
    Sounds as if something was hit. Usually the right side. The 42" decks are my least favorite because they exhibit the least rigidity because the sheetmetal has such a flat characteristic. Other decks with more bends are far more rigid. Is the right blade higher? What about when mowing and you go along with the left side of the deck next to where the right side just cut; is it even worse?
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My huskee riding mower start missing when I engage the mower deck 17.5 hp briggs [ 1 Answers ]

My huskee riding mower 17.5 hp briggs ! Starts missing running bad when I engage the mower deck

Putting lower belt back on mower deck, Craftsman riding mower [ 1 Answers ]

What is the tension pulley? Gram, 67, wants to know? Replacing belt myself hopefully. Craftsman riding mower, lower belt came off. Have lowered deck, belt is loose, not sure where it goes, studying manual but how engage, disengage tension pulley?

I need a mower deck belt for a Craftsman xls 1000 riding lawn mower. [ 2 Answers ]

I can't find a belt for my Craftsman xls 1000 riding lawnmower deck.

Troy bilt lawn tractor mower deck problems [ 1 Answers ]

I have a troy lawn tractor 18 horse 42 inch cut. I have replaced the belt on the deck several times always buying the same belt. The last two times I replaced the belt , the belt seems to be to long for the deck. It is loose and does not tighten up right when the deck is ingaged causeing the blades...

Mower deck belt routing John Deere 420 - 50inch deck [ 3 Answers ]

Hi - I am looking for help on the routing for deck belt for John Deere 420 with 50 inch deck. Any help would be appreciated. [email protected] Thank you ! Steve

View more questions Search