Ask Experts Questions for FREE Help !
Ask
    tuckerbea's Avatar
    tuckerbea Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 30, 2012, 07:41 PM
    Submersible pump troubleshooting
    Not getting water in house from well. Holding tank feels empty
    Relay switch points look real worn. Could the relay be bad?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jul 1, 2012, 02:37 PM
    Quote Originally Posted by tuckerbea View Post
    Not getting water in house from well. Holding tank feels empty
    relay switch points look real worn. Could the relay be bad?
    Try replacing the control box and see if that doesn't help. Good luck, Tom
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #3

    Jul 1, 2012, 05:27 PM
    We are assuming you have checked the breaker and made sure the points are closed on the switch.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Submersible pump troubleshooting [ 1 Answers ]

I recently pulled my pump due to a broken wire due to a broken wire, pressure had been operating fine. Once I reintalled into the casing I had to clear a lot of rusty water from tap screens, diverters toilet tank etc. Since I have reinstalled I have noticed that it will operate fine when called on...

Submersible Pump Troubleshooting? [ 7 Answers ]

Hi, I have nimbus hj 1000 submersible pump fitted in my cooler , and it stops again & again after working for a small duration & sometimes it never works , please help me what should I do to troubleshoot this problem.

Troubleshooting submersible pump problem [ 4 Answers ]

Hello! I am having a little trouble with a submersible pump. It pressures up to 28 pounds (it should pressure to 50 pounds) and then it just sets there. Can't seem to get any more pressure but the switch doesn't seem to be doing anything after it reaches the 28 pounds. I have watched it and I can't...

Submersible pump troubleshooting [ 1 Answers ]

Hai dear expertist, I have sumersible pump. When I switch ON it does not run automatically, the sound comes like wooooooo. When I rotate with hand it run and becoes very hot within short times. Evey time I start it require manually to run. Please what could be the reason?

Submersible well pump troubleshooting [ 1 Answers ]

Hello: [email protected] We lost electrical power for about 24 hours on my submersable well pump. I can not get any water to rise out of the well. The pump sounds to be fast cycling so I shut it down. On opening the line from the well before the holding tank there is no water present. ...


View more questions Search