 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Electrician help blog
I have an omron LY2 12vdc acting as a relay for a projector screen. I wasn't able to get the screen to move so unplugged everything from the relay (without taking note of how they were plugged in to begin with), and tried to connect the two sides of the power cord to see if that would elicit a reaction. One side of the cord however is 4 wire (connected to projector) and the other is 3 wire... I don't know what to do with the extra red wire and I don't know how to plug it all back into the relay, any ideas on the subject would be appreciated.
Thanks. |
||||
Check out some similar questions!
Electrician
[ 1 Answers ]
Can 3/4 pvc be used for 110v power above ground in queens feeding a garage for a 2 family home it would be surface mounted on a cocrete wall 3feet or more above ground level
Tell me I need an electrician...
[ 1 Answers ]
Hey gang, Removed old flushmount in kitchen ceiling that had 3 incandescent bulbs. Two wires coming down from attic--knob and tube for this particular fixture, I think. No box in the ceiling. Old fixture was connected to a metal hanger connected with wood filler strips. Wires just come through a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
