Ask Experts Questions for FREE Help !
Ask
    Jean239770's Avatar
    Jean239770 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 28, 2012, 04:43 PM
    Toilet water supply line
    I replaced the inside pump and now the supply line is all kinked and I can't get it attach back under the toilet
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Jun 28, 2012, 05:20 PM
    Hi Jean

    Purchase a new toilet supply and be done with it! You really don't want the kinked one anyway... probably all cracked at the rubber under the SS braid, right?

    Bring the old supply tube to the store with you and match them up... quick install once you get it!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Leak at water supply line behind toilet [ 3 Answers ]

How can I fix water leaking from the area where you actually turn off the water supply behind the toilet?

Repairing toilet water supply line [ 1 Answers ]

How do I repair a leaking water supply line to my toilet?

Flexible toilet supply line sprays water [ 8 Answers ]

Hi, I am replacing my toilet supply line with a 3/8" compression flexible braided supply line. The distance from the value to toilet is about 6". I have tried a 9", 12", and finally a 20" flexible supply line. As soon as I turn on the valve, water shoots out from below the plastic connector...

Water leaking from where line connects to toilet and water supply. How do I fix? [ 3 Answers ]

Toilet water supply line PEX to ? [ 8 Answers ]

Hey Guys, You all have been such a great help with my questions about our bathroom remodel. I have one final question... I hope! I am re-routing the water supply line for the toilet. The old line was galvanized steel and I am replacing it with PEX, which has been easy peasy to put together. ...

View more questions Search