 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to remove a standadyne shower diverter and tub drain
I have 25 year old Stanadyne (Moen) fixtures in my bath tub. I want to replace the pop up drain and the diverter (built into the tub spout. Fr the drain, when I remove the nob there is no screw to remove and there is no screw below the stopper. How do I remove the stopper? As for the spout, again there is no screw to release and the spout will rotate but not unscrew. I'm afraid to pull too hard. How do I get it off?
|
||||
Check out some similar questions!
Had k-t14776 and k-304-ks recently installed. Now I'm told I have no shower capability. Will purchasing a diverter tub spout give me options for both a shower and bath?
I'm trying to replace my shower diverter valve since it leaks into the tub significantly when turned to the shower. It's a 3-knob system (hot, diverter, cold) and I don't know the brand. I've gotten the knob off, the surrounding piece off, and one nut off, but I'm not sure what to take off next...
I have a 3-handle moen tub/shower faucet. The center handle(diverter) froze up and will not turn. I ordered a replacement(part #94543) thinking it would give a clue as to how to remove the old one. I guess its corroded in place around the brass area of the cartridge. Any tips on removing the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
