Ask Experts Questions for FREE Help !
Ask
    bcat's Avatar
    bcat Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 28, 2012, 06:14 AM
    536772100 engine wire
    What is the part number for the engine wire(zone cable, shut off cable)?
    Upon disassembly I found this is simply an electrical wire that allows the engine to be started or stopped
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Jun 28, 2012, 08:06 AM
    Is this for a Bugatti Veyron, or a Fiskar?
    bcat's Avatar
    bcat Posts: 2, Reputation: 1
    New Member
     
    #3

    Jun 29, 2012, 04:30 AM
    Sorry, my question dealt with a craftsman edger & upon disassembly I discoved the answer to my question.
    Thanks, bcat

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Explain which wire is ground wire when you have 2 black wires and 1 white wire [ 5 Answers ]

Explain which wire is ground when you have 2 black wires and 1 white wire

Is hot wire is not a neutral wire or vice versa in single phase two wire AC source? [ 1 Answers ]

I am a little bit confused why in AC single phase 2 wire source is merely classified the 1 wire as hot and other wire as neutral. The hot wire travels the current from the source to the load and going back the current to the source through the neutral wire. I know that in AC circuit, the signal or...

Black wire red wire and white wire spliced to 10/3 on a 220 circuit [ 25 Answers ]

I have installed a disconnect between my dryer receptable and a tanning bed. I want to splice the 10/3 box wire to the existing 220 wiring at the dryer. Dryer= red, black, white and bare ground wires 10/3 wire= black, white, and bare ground How do I splice these to allow the disconnect box to...

How to wire my new Briggs & Stratton engine [ 4 Answers ]

I bought a Briggs & Stratton Vertical OHV Engine with Electric Start 17.5 HP, 1in. X 3 5/32in. Shaft, Model# 31C707-0005-G1 to replace the engine on my Swisher trail mower. The old engine was a pull start so obviously this new engine has more wires. I bought a 5 tab switch and I did get most of...


View more questions Search