Ask Experts Questions for FREE Help !
Ask
    ron2688's Avatar
    ron2688 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 27, 2012, 07:12 AM
    Ac id fan motor
    Can an id fan motor burn out low speed setting?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 27, 2012, 07:31 AM
    Quote Originally Posted by ron2688 View Post
    can an id fan motor burn out low speed setting?
    Anything is possible. You need to take an Amp draw with an Amprobe and compare that reading to the motor rate for low speed operation WHILE the motor is running in its normal enclosed enclosure in the furnace or air handler OR if it is a outside condenser fan motor with that enclosure in normal operating condition. There is no yes or no answer without the testing.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Central air conditioning units fan motor stop running has new motor [ 0 Answers ]

Central a c unit fan motor stop running has new motor and capacitor

Fan Motor or Blower Motor? Trane XB80 [ 0 Answers ]

Outside fan motor clicks and hums - are the fan motor (outside) and blower motor (to circulate the air) tied together? i.e. if one is out, neither will work? If so - how do you diagnose which motor is out? This is on a Trane XB80 Furnace & Air Conditioner

New fan motor new capacitor motor burned up [ 2 Answers ]

Air went out. Replaced outside motor fan and capacitor and it burned up again. Fan was very hot when I took it out. Causes?

Trane condenser fan motor to A.O.Smith condenser fan motor [ 2 Answers ]

The Condenser fan motor I removed from a Trane unit had four wires 1 black, 1red, 1brown and . The black wire went directly to #3 on the relay, the red wire went to the capacitor with black wire from #6 on the relay the brown wire went alone to the other side of the capacitor. I purchased...

New Fan Motor - WIRING issue - not the same as old motor - SIBERIANAIR - are you here? [ 3 Answers ]

I have a 7 year old Trane XE 1000 and 2 days ago the fan simply stopped spinning. It has been determined that it is the fan motor. I went and bought a new one but this motor comes with 4 wires (Black, White, Brown and Brown with White stripe). The old motor came with three wires which were Purple,...

View more questions Search