Ask Experts Questions for FREE Help !
Ask
    CincyNez's Avatar
    CincyNez Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 27, 2012, 05:02 AM
    Truck won't go into gear
    2001 F-150 will not go out of park. The power windows also don't work, but everything else is fine.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 27, 2012, 06:01 AM
    Do your Brake lights work, may be a fuse(s)
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #3

    Jun 27, 2012, 06:10 AM
    . Check all under hood and under dash fuses with a test light or multimeter.

    . Check the brake light switch, if they don't come on. The switch may need adjusting, replacing, or spraying with WD-40.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Truck will run but kills when put in gear [ 1 Answers ]

I have 98 gmc yukon, w/ 5.7 350. About 5 months ago I was driving up the road and it just killed( did this twice that day). Put it in neutral started back up and I kept rolling. A month later it killed on me again but would not restart. Got it towed home and it started 2 days later. At this point...

Gear box reduction & gear [ 0 Answers ]

My plant consists of drum of about 7feet dia and 23 feet length the drum when full loaded bears weight of 10 tons including the weight of drum. This drum is to be rotated at 0.4 rpm can u help me in getting the gearbox turn ratio & gear type & no of teeth to be used for it

Gear box reduction & gear [ 0 Answers ]

My plant consists of drum of about 7feet dia and 23 feet length the drum when full loaded bears weight of 10 tons including the weight of drum. This drum is to be rotated at 0.4 rpm can u help me in getting the gearbox turn ratio & gear type & no of teeth to be used for it

Repalace ring gear gear on brigg and sratton 14.5 engine [ 1 Answers ]

How do you removed the ring gear from the fly wheel and put on new one on the teeth is worn out and the starter will not turn the motor

1988 chevy truck starts fine, put it in gear and it dies unless you mash the gas [ 1 Answers ]

Chevy 1988 truck 5.0 My truck will start and run, but once it is warmed up and you put it in drive or reverse it dies, it will not stay running. If you put it in neutral or park it idles fine. If you put it in drive and stomp the gas it will drive, but when you come to a stop sign it will die,...

View more questions Search