Ask Experts Questions for FREE Help !
Ask
    Cowboyrick666's Avatar
    Cowboyrick666 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 25, 2012, 06:05 PM
    TWL736A100A0 weathertron heat pump wiring
    I have This Heat Pump. I am using an Alerton VLD-362 Stat. With the flowing VLD TERMINALS
    24 VAC - RED WIRE TO FURNACE
    GND - BLACK WIRE TO FURNACE
    BO-0= FAN - GREEN WIRE
    BO-1= HEAT PUMP COMPRESSOR YELLOW WIRE
    BO-2= REVERSING VALVE
    B0-3= HEATING STAGE 1 WHITE WIRE
    BO-4= HEATING STAGE 2 ORANGE WIRE
    BO-5= NOT USED
    AO-0= ECONOMIZER
    A0-1= NOT USED
    AI-1= OUTDOOR AIR TEMPERATURE (OPTIONAL)
    AI-2= SUPPLY AIR TEMPERATURE (REQUIRED) BLUE AND BROWN

    I HAVE AN ELECTRIC FURNACE.
    CAN YOU GIVE ME ANY HELP WIRING THESE TWO UNITS ?

    THANK YOU, RICK COFFEY
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Jun 25, 2012, 07:35 PM
    Sorry Rick, I personally can't help you out with this one. We just don't see heat pumps in my area. You really almost need an actuall heat pump tech that is familiar with your equiptment to get any good results. Your next best bet would be to contact tech support for your specific equiptment and controls. Good luck and please do let us know how things work out.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Weathertron Trane Thermostat with heat pump? [ 0 Answers ]

I have a weathertron thermostat that a friend tried to replace with an inferior thermostate, he tried to replace the old thermostat and didn't know how to re-wire it correcly. So I looked it up on the web and tried to correct the problem, that the auxiliary worked but not emergency heat. Now the...

Trane Weathertron (Baystat 339A Heat Pump) to Filtrete 3M-30 [ 0 Answers ]

I'm going to replace my old Trane Weathertron (Baystat 339A Heat Pump) mercury thermostat with a Filtrete 3M-30. I'm not sure of the wiring setup. On the old trane wearthetron I have G O X2 Y T W B R On my new 3M-30 C B O W2 W Y Y2 RH RC G A I'm not sure how to connect these wires.

Trane Weathertron Heat Pump with digital thermostat? [ 6 Answers ]

Hello all you HVAC know it alls. I just bought a 20 year old condo which has a Trane Weathertron heat pump. The people who sold it to me took there thermostat with them (they told me they were going to at time of purchase) and left me with eight wires sticking out of the wall (orange, red,...

Heat Pump Termostat { Weathertron } [ 1 Answers ]

I have a Weathertron Termostat which controls my Heat Pump and Furnace - Model #3AAT80B1A1. Both the lights Auxiliary, and Emergency are burnt out. I would like to replace the Termostat. Where can I get a replacement or can you substitute a Honeywell with the same wiring as I will be doing it...

Weathertron heat pump [ 1 Answers ]

I Bought My House Last Oct. The Previous Owners Had A New Unit Put In 07/26/2005. It Has An Entended Warranty On Same For 5 Yrs Compressor 5 Yrs Parts.the Unit Was Cleaned And Serviced Before I Purchased The Hse. I Lived In The Hse All Summer Prior To The Purchase And Had No Problems The Year...

View more questions Search