Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Why doesn't the drain/overflow kit fit my bathtub?they are both 20 in
[ 1 Answers ]
We bought an acrylic tub 20 in in height and bought OS&B waste/overflow clicker that fits 20 in tubs.. but it doesn't fit. Is it normal to cut the pipe to size? It doesn't make sense to me especially when the kit has a flexible copper pipe on overflow for perfect fitting.
How do I snake my bathtub drain?
[ 15 Answers ]
Whenever I try to push the snake down the drain, it comes out the top drain hole. Here is the snake that I used; 14662 Here is a picture of the tub; 14663 14664 Twice before in the past 4 years I was able to successfully get the snake down the drain and remove a hair ball and than the water...
Smelly bathtub drain, overflow
[ 0 Answers ]
Cleaned bathtub drain with 10 minute hair clog removal twice, cleaned overflow out with bathroom cleaner an water a little hair nothing else but that horrible smell. House is 20 years old so plumbing is pvc pipe. How do I get rid of this smell? The bathroom is on the first floor and is back to...
Bathtub overflow drain
[ 1 Answers ]
I'm replacing a tub that has no overflow drain. Does the UPC require that a tub have an overflow drain? Thanks!
Snake stops short in bathtub overflow
[ 1 Answers ]
Trying to cure a very slow bathtub drain... I bought a snake that attaches to my power drill. I took off the overflow hole cover (the cover also holds the Drain stopper switch, and the switch from shower-to-tub, So I pulled out some attached gear along with the cover). The snake when down... View more questions Search
|