Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Change vent pipe that is cast iron with a 90 degrees
 [ 6 Answers ]
 Hi, Need Help with plumbing it is from my toilet upstairs open ceiling and find leak it is a 90 degree cand I use pvc or what would be best just need to fix the pipe is there a sleeve you could put over it... I would send pictures if someone could tell me how... Thank You Macdaddy53 
How much slope is required once I have the p-trap installed.
 [ 3 Answers ]
 The abs pipe is approx 10in long before it elbows straight down . This is a new install washroom with the builder having done the rough-in 5yrs ago.Also I must move the abs to the right about a in so it will line up with my pedestal sink. Thanks Shawn 
Circuit vent, slope?
 [ 2 Answers ]
 I am building a combo bathroom / laundry room in an existing building in a room where there was no plumbing before. I want to avoid venting directly out this roof (for reasons I can describe if you'd like), so my intention is to circuit vent the fixtures in this room back to the main stack. My... 
Toilet and Tub Vent
 [ 7 Answers ]
 
Reposting per Tom's Tips. Any suggestions? Thanks in advance! -------------- Hi! I'm plumbing a bathroom and I'm trying to figure out the correct way to vent an adjacent tub and toilet. I have a single 1.5" vent pipe going to the roof. I'd like to use the one vent for both the tub and... View more questions Search 
  |