Bryant furnace model 395cav with ac

ccunurse2005 Posts: 1, Reputation: 1

New Member

Jun 21, 2012, 02:57 PM

Bryant furnace model 395cav with ac

When I turn on AC the air is not cooled. I checked the unit along the side of the house and it is running but inside the air from the vent is not cool.

Check out some similar questions!

Bryant Furnace 395CAV [ 2 Answers ]

How to find the manufacturer part number of the main blower motor in my Bryant Furnace 395CAV 036070, SERIES G ?

Bryant 395CAV Furnace [ 0 Answers ]

I have done all the usual start up procedures and nothing happened. I waited and redid the procedure again and still nothing happens. I replaced the batteries in the thermostat hoping that is all that is needed. I checked the electrical box to make sure it wasn't tripped all are on. I noticed...

Bryant 395cav error code 24 [ 1 Answers ]

I have a bryant 395cav042091 +80. Got a new puppy that chewed up the thermostat lead to the cenral air unit outside. I repaired the wires leading to the central air but the furnace is flashing a code 24 (secondary voltage fuse is open) and nothing works. Tried Disconnecting thermostat leads and...

Bryant 395CAV blower speeds [ 1 Answers ]

Hello, It appears that my furnace (Bryant 395CAV) isn't blowing cool air at a high enough speed. I don't feel that the house is as cool as it should be - the air coming from the vents is cold, although it doesn't seem to circulate around as much as it could. I've done some "balancing" and...

Bryant 395CAV Furnace Won't Start [ 3 Answers ]

The furnace typically takes three or four ignition cycles before flame extends down burner to reach the flame sensor. It seems to light only halfway down burner on most attempts. Sometimes reaches shut off and then I have to flick switch to repeat cycle. Help.

View more questions Search

Check out some similar questions!

Add your answer here.