 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Brake lite failure
I have a 2008 harley Davidson Electra Glide. My brake lite won't work. I changed the lite bulb, the fuse, the brake module. Even when I apply both the front and rear brake. I tried to look for a broken or a split open wire can't seem to see anything wrong.
|
||||
Check out some similar questions!
Hi, All! I was told by someone, who is not a mechanic by trade, that my brake fluid was getting lower in the fluid cylinder and that I needed a brake job. There don't appear to be any leaks, my brakes seem to work fine and there are no noises. He made it seem like brake failure was...
My furnace pilot would not stay lite, changed the thermcouple but pilot would still not stay lite, i installed a new gas valve, now pilot will stay lite until the unit lites up the furnace unit will come on and pilot goes out and unit stays on for about 3 min and then i hear a click and the furnace...
Hi. My brake lights come on sometimes after I have left vehicle. I can force them off by pulling up on brake pedal or wedging something behind pedal. It kills my batteries when it goes un-noticed. Is this an adjustment? Or do I need to replace the brake switch? I have looked (awkward to get at)...
My sons 2000 Camry stopped shifting, no brake lights and no cruise control. I changed out the brake light switch, but it still does not work? Any ideas, please. Thanks
Hello, I have a 2000 Mercury Grand Marquis with appx 55,000 miles. Today, while turning left at an intersection, I accelerated to about 15 MPH, then realizing I was turning a bit too sharply to the left, I corrected slightly to the right - while remaining in an overall leftward turn. Two...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
