Ask Experts Questions for FREE Help !
Ask
    genobeano's Avatar
    genobeano Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 20, 2012, 04:54 PM
    How to replace a heil furnace blower :youtube.com
    I need to replace my blower on my heil furnace model#NUGK075DG01.
    IT'S MAKING a ton of noise[maybe the bearings are bad] , I pulled the lower front cover off the furnace & tried to run the central air [ the blower fan?? Was making a lot of noise
    Any suggestions ?
    Thanks,
    Geno

Check out some similar questions!

How do I replace a heil furnace squarel cage? [ 0 Answers ]

The squarel cage is making noises

How to replace a blower motor on a Heil furnace? [ 2 Answers ]

I have a model NTG3075FBA5 Heil gas furnace, approximately 10 years old. The blower motor has begun to intermittently make squealing noises and I suspect the motor bearings are about to fail. I have located a source for the proper 1/3 HP motor foir just under $100. The problem is I do not see...

Heil furnace blower comes on by itself? [ 2 Answers ]

Heil furnace fan just comes on by itself. Never happened before. However I replace the thermostat in February and was wonder if that may be the issue.

Heil furnace blower not working [ 0 Answers ]

Turn on heat/ flame on not blower. Turn on air nothing. Open door ti furnace switch blower wire to cont it runs, put wire back to cool. Hold door switch blower comes on and right back off. Heil furnance/ honeywell board

Blower won't come on Heil furnace [ 2 Answers ]

I have a heil furnace in a home I just purchased. The first day it worked fine. Second day, it fires up, I can hear a motor running, but the blower doesn't come on. Relay switch? Thank You!

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.