 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a honeywell magicstat /28 return feature is on and nothing works except on/off
The return feature is on and ac unit not working temp. Setting at 75 deg. And inside temp. Showing 78 deg. Change temp. Setting nothing happen so I replace batterys and no matter what I changed the ac unit never came on so I installed another thermostat that I had on hand and everything work fine, is my programmable thermostat gone bad?
|
||||
Check out some similar questions!
Hi, I have a Honeywell Thermostat MagicStat/32 which is saying (not Flashing) "bat low." As per the instruction manual, I changed the Batteries. This did not clear the screen. I tried another set of new Batteries, which again did not clear the screen. I am sure I put them In correctly. ...
How do I change the display from fahrenheit to Celsius?
My thermostat's fan will not turn off. Do you have any suggestions?
My Honeywell MagicStat thermostat indicates 'system on', but my furnace is not on and the current temperature in my house is 10 cooler than what I have programmed it to be (during the heating season). I have found turning the thermostat to 'off' and then back to 'auto' gets the furnace to start,...
I've changed the batteries on the thermostat when the "lo bat" message displayed. Per the user manual, I had to install the batteries backwards for 10 seconds in order to reset the unit. I then reinstalled the batteries in the proper manner and began to program the unit. Approximately 20 seconds...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
