Ask Experts Questions for FREE Help !
Ask
    kheri2012's Avatar
    kheri2012 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 13, 2012, 07:08 AM
    Submersible well pump
    Submersible well bump using in the sea well,after two months from installation the build pressure is dropped from 10 BAR to 6 BAR and the pump is merged enough in the water so always enough water.would you please anyone can help me solve the problem.we expect a leak in the pipes but maybe something else.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jun 13, 2012, 07:59 AM
    Quote Originally Posted by kheri2012 View Post
    submersible well bump using in the sea well,after two months from installation the build pressure is dropped from 10 BAR to 6 BAR and the pump is merged enough in the water so always enough water.would you please anyone can help me solve the problem.we expect a leak in the pipes but maybe something else.
    Does the gage fall or hold steady when the pump shuts down? Let me know, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Comparison between jet pump and submersible pump [ 2 Answers ]

I have a 300 feet deep bore well. Water is to be stored at 3rd floor level above ground. Which type and capacity of pump would you suggest for use?

Submersible pump runs but doesn't pump. [ 4 Answers ]

The water to my house quits periodicly. When it does this, I have tested the power to the pump and no probem. Also, I can hear the pump running but there is no pressure. I can shut the breaker off for a few seconds then turn it back on and it will pressure up normally. There is no indication of a...

Two questions pool pump & submersible well pump for irrigation in river [ 3 Answers ]

Have a inground pool about 5 yrs old that we replace motor every yr,the wireing & amount of juice is OK it's the sealed bearings that start squealing an freeze up, 2ND ? The well pump is 220v / 2 wire direct to breaker ,its on or off nothing fancy an has worked for years except this yr ,runs...

Submersible Pump [ 6 Answers ]

A friend asked me to hook up his water pump. He has the red black yellow and green wires running to the house, which he wants hooked up to the box. This is not right is it. I thought that power came from main box to a control box and these wires hooked to control box from pump?

View more questions Search