 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane XR 80 AC stopped working
Trane XR80 Furnace w/AC, yesterday 10 Jun 2012, AC stopped working, Thermostat shows nothing. I checked circuit breaker both for Furnace and Compressor; actually reset them as well. Nothing. When I open the door the LED light is not on. With Furnace power off I reset each cable lead, and then turned power back on; still nothing. What I did notice is when hold the door switch closed and turn on power, I see the LED come on for 2 seconds and then shut off. Any advise would be appreciated
|
||||
Check out some similar questions!
The unit worked all day yesterday. I went to set the temp for the evening while I slept, and the thermostat would lower the temp, but the words "cool on" just blinked and never stopped, the unit never would turn on. Any ideas?
I have a Kirkland Signature, by whirlpool Dryer that stopped heating and timer stopped working at the same time. What may have caused this?
Hi, Current Equipment: Furnace: Trane BLD068L936, heating only Thermostat: Honeywell T8085A Last night I was going to change my thermostat to a Honeywell RTH230B. I have 3 wires coming out of the wall (1) Red, (1) White and (1) Green. I placed the red wire in the Rh connector and kept the...
I have a Trane XL80 gas furnace. It also has a heat pump for ref. Today, the temp in our home dropped and I noticed that the furnace was not working. I opened it up, and vacuumed it out, and have no idea why it started working. All was good! However, hours later, the temp is again...
Hi Everyone A wall of electrical outlets in my kitchen just stopped working. They were working just fine about a month ago. I tried checking the circuit box, and turning the circuits on/off just to make sure anything that has been tripped was turned on back again. But it didn't work for the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
