Ask Experts Questions for FREE Help !
Ask
    gawag's Avatar
    gawag Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 10, 2012, 06:32 PM
    Hunter fan 85112-1; remote 85095-1 doesn't work
    The remote failed for the fan[I] for sevearl weeks, then worked once when I removed the housing which holds the receiver unit. After it would not work after this initial operation, I switched receivers and remotes with another fan that also has a light. After plugging in the swapped receiver the light works when powered by the weall switch , but the remote will not control the light or the fan ]
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 13, 2012, 09:02 AM
    Remotes and receivers have codes installed via small dip switches. You need to check to insure switches in both units are an exact match. Moving a dip switch between O and I , even for just one switch will stop it dead. To make it easy move ALL switches to O
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Will a Hampton Bay Fan or HarborB remote work to replace a Hunter fan remote control? [ 1 Answers ]

I bought a used Hunter fan Model 23530 and it is missing the remote control Model 85095-01, Freq: 350Mhz, Battery 12V, Type 23A, MN-21 or equivalent. I have several Hampton Bay fan remotes that work. I also have a Harbor Breeze fan remote that I could use. They have the same functions and...

Hunter fans remote control 85095-02? [ 0 Answers ]

I installed a new motor, how do I program the remote?

Where to get Hunter Fan battery cover for remote 85095-01? [ 1 Answers ]

Anyone know where I can find (anyone willing to sell) just the battery cover for Hunter Fan Remote 85095-01? I already contacted Hunter Fan and they would only sell the entire remote.

I need a Hunter fan remote part #85095-02. [ 1 Answers ]

I need a Hunter ceiling fan remote part #85095-02. The dog chewed on the old one & broke the wires in it.

Hunter remote 85095-01 dropped and won't work [ 3 Answers ]

I have a Hunter remote 85095-01 on my wall. Unfortunately I knocked it off the wall :( and now it won't work. I pulled the battery out, tested it and it's good, put it back in but still won't work. The red light does go on however. Can anyone offer a suggestion other than buying a new remote? ...

View more questions Search