Ask Experts Questions for FREE Help !
Ask
    Littlejj852000's Avatar
    Littlejj852000 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 5, 2012, 07:03 AM
    1993 honda with h22 a
    Im getting gas to fuel rail and I'm getting fire tries to start but won't what could it be
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jun 5, 2012, 07:05 AM
    Replace the Ignition Control Module (ICM) and coil inside the distributor. Apply silicone heat transfer grease to the back of the new ICM. This assumes the Check Engine Light comes on and goes off, after 2 seconds, when the ignition switch is turned to ON (Position II).
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1993 honda civic si 1.6L [ 1 Answers ]

hi everybody my name is david. I have 93 civic and its stalls randomly mostly I guess when its warm but its random could be on highway or in park. I took it into the shop and they noticed the last owner of the vevhile wired the remote starter into the tack wire and it could have damaged the...

Can a 1993 honda integra 1.8 motor and 5 speed trans go in a 1994 honda prelude [ 0 Answers ]

Can a 1993 honda integra 1.8 motor and 5 speed transmission go in a 1994 honda prelude with a 2.0 and automatic transmission

1993 honda civic [ 3 Answers ]

I have a 1993 Honda civic that won't start. I was pulling into my driveway and the car died (and wouldn't start back up), it has an Automatic and the shifter locked in drive. I had to use the shift lock button to put into nuetral to push the car. Now the car cranks but won't start. I have a CEL...

1993 Honda Accord LX [ 3 Answers ]

I need to know where the map sensor is located under dash or under hood ? Thank You Roy

View more questions Search