 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Craftsman riding mower runs but shuts off when turning on the mower deck
I have a craftsman riding mower 26 hp b&s with a 48" deck. It's been running fine till yesterday went to mower and as soon as I turn on the mower deck it shuts off. It starts right back up when I try it again off it goes. It seems like it has something to do with the clutch am I right?
Thanks Joe |
||||
Check out some similar questions!
What is the tension pulley? Gram, 67, wants to know? Replacing belt myself hopefully. Craftsman riding mower, lower belt came off. Have lowered deck, belt is loose, not sure where it goes, studying manual but how engage, disengage tension pulley?
I recently went out to mow my lawn with this otherwise reliable machine. I pulled the PTO clutch switch to engage the blades. They started to rotate and I was on my way, for about 30 seconds and then the blades stopped rotating. The motor runs perfectly yet the drive unit for the blade belt does...
Rear engine craftsman mower runs fine,but the mower deck does not engage when you lower the lever?it appears the belt is on the pulleys,help...
I can't find a belt for my Craftsman xls 1000 riding lawnmower deck.
I have a 8yr old craftsman riding mower with a 42in deck I went to get a belt and I got the right one but I can not get it to go on do I need to remove any of the pullys or are there any tricks that I need to know or should it just go right on it is about 3inches to small. And I did disengage the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
