Ask Experts Questions for FREE Help !
Ask
    vinod gupta's Avatar
    vinod gupta Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2012, 11:54 PM
    Three phase load calculations
    I have three 1.5 kw AC connected in each of the phase since I have 11 KW three phase supply from electricity board. I want to know how much minimum 3-PHASE power backup I should ask THE SOCIETY to enable me run all the three AC on power back up in case the main power fails.

Check out some similar questions!

Powering single phase load with 3 phase generation [ 4 Answers ]

How to select a 3 phase generator for 75kva of single phase load calculated

Latent Heat Load - HVAC Load Calculations [ 5 Answers ]

Can someone tell whether latent load contributes to the total cooling load of a building or not.if it does, tell which way, and how it should be looked at during load calculation of a building.Also if possible display a perfect, easily understood definition of latent heat.Thanks

Load calculations for three phase [ 0 Answers ]

Hi There -Three phase 240VAC power supply -Full load current is 240amp. 80amp/phase.. Is there any formula to balance the load current on each phase. Please advise. Thanks.

How am I going to size my 3 phase X'mer with 1 phase load using current as reference [ 3 Answers ]

Hi, I'm Peping: I have 90 pieces of single phase loads with current of 2 Amperes. This will be loaded to a 3 phase transformer, Wye connected having a line to line voltage of 220 Volts. What will be the size of the transformer required for the mentioned loads? Many thanks, Peping

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.