Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I stop a leak coming from a second floor apartment waste stack?
[ 1 Answers ]
We made sure the seals in the toilet were not leaking. Its coming from a cast iron waste stack. It broke through the ceiling . It started with a bubble. Looks like they have tried to fix it a number of times.
Sanicompact waste pipe valve...
[ 3 Answers ]
I installed my Sanicompact toilet.. And in case I have to remove it, I put one of these http://184.173.241.120/images/categories/C861medium.jpg(basically this) in the output pipe.. Os that it can't flow back out if I unhook the toilet The out pipe is a 1" pvc and the Saniflo has a macerator...
Installing waste line shut off valve vs replacing spider gasket
[ 3 Answers ]
Searched the forums & did not see this issue addressed. Replaced the spider gasket in my multi-port valve 9 months ago. Now when backwashing, the water empties out of the waste line. The valve assembly itself (spring, plate, etc) is in good shape, but the spider gasket seems a bit raggedy. ...
Distance of check valve to pump in waste system
[ 31 Answers ]
Just installed a bathroom and laundry room in the basement, that was already to an in-ground tank. I have a Rigid waste pump in the waste tank. The outlet pipe goes up about 6 feet then bends to a 45 where I have a check valve and shutoff valve. Pipe goes up at a 45 another two feet and then...
Angle stop valve
[ 3 Answers ]
Do you have any idea on how to install a stop valve under a bathroom sink? Thanks R. Koehn View more questions Search
|