Ask Experts Questions for FREE Help !
Ask
    jerbo889's Avatar
    jerbo889 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 1, 2012, 07:49 PM
    stop and waste valve
    I have a ¾” (threaded) stop and waste valve located in the ground under the floor of my cabin in Big Bear Lake, Ca. The valve can be opened and closed by the ½’ square rod which fits into the valve and comes up through a hole in the floor under the kitchen counter cabinet.
    Where can I purchase this type of stop and waste valve?? I have tried all the plumbing stores in Big Bear Lake and the clerk’s eyes just glaze over when I tell them what I need which is really strange since many of the older cabins in Big Bear Lake have stop and waste valves similar to mine.. [email protected]

    Thanks…jerry
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jun 2, 2012, 06:10 AM
    Best I can do is a stop and waste with a key stop. (see image) check them out at
    Stop Valves : Corner Hardware, Your Home for Home Improvement
    Good luck, Tom
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I stop a leak coming from a second floor apartment waste stack? [ 1 Answers ]

We made sure the seals in the toilet were not leaking. Its coming from a cast iron waste stack. It broke through the ceiling . It started with a bubble. Looks like they have tried to fix it a number of times.

Sanicompact waste pipe valve... [ 3 Answers ]

I installed my Sanicompact toilet.. And in case I have to remove it, I put one of these http://184.173.241.120/images/categories/C861medium.jpg(basically this) in the output pipe.. Os that it can't flow back out if I unhook the toilet The out pipe is a 1" pvc and the Saniflo has a macerator...

Installing waste line shut off valve vs replacing spider gasket [ 3 Answers ]

Searched the forums & did not see this issue addressed. Replaced the spider gasket in my multi-port valve 9 months ago. Now when backwashing, the water empties out of the waste line. The valve assembly itself (spring, plate, etc) is in good shape, but the spider gasket seems a bit raggedy. ...

Distance of check valve to pump in waste system [ 31 Answers ]

Just installed a bathroom and laundry room in the basement, that was already to an in-ground tank. I have a Rigid waste pump in the waste tank. The outlet pipe goes up about 6 feet then bends to a 45 where I have a check valve and shutoff valve. Pipe goes up at a 45 another two feet and then...

Angle stop valve [ 3 Answers ]

Do you have any idea on how to install a stop valve under a bathroom sink? Thanks R. Koehn


View more questions Search