 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rheem power vent no hot water
I have a rheem power vent and the burner will not ignite even setting the temp to max. The power vent comes on after shutting the switch off and on. The light on the front gives two quick flashes pause and one flash. Any suggestions would be a great help.
|
||||
|
||||
|
Hi jfh
There should be an installation/repair manual on the side of the water heater that will tell you exactly what the two quick flashes mean. However, if the manual isn't available, contact the technical department over at Rheem/Ruud by calling them @ (334) 260-1500 You will need your water heater's model number and serial number when you talk to these guys (located on sticker on heater). These guys should be able to tell you what is wrong and how to repair it or get specific parts locally, if needed! You may also be able to find your owner manual by clicking on this link: http://www.rheem.com/productdocuments.aspx?power%20vent Good luck! Mark |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi. I have a Rheem Power Vent hot water heater, model PVW50-36FV, that won't turn on. The far right and left LED lights indicate the FV sensor detected the presence of flammable vapors. The unit is shut down and in lockout mode. How do I unlock this baby? Checked the sensor and it's within normal...
Where can I locate a service manual for rheem power vent hot water heater?
I need to replace a 15 year old Rheem Power Vent water heater that is leaking. I plan on replacing it with a new Rheem water heater. I think I can do this myself. In looking at my old unit, it appears that the power vent is just an add-on motor and vent on top of the water heater. My old vent...
I have a Rheem Power Vent hot water heater, model 21VP40-1. My problem is that it will not stay lit on the final start up stage. It operates OK, stays lit, if turned on manualy on the unit. I have replaced the gas valve. I am leaning toward the control module. Any advice?
View more questions Search
|
