Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have a early 90's Kohler shower valve and rounded out the cold stem valve seat.
[ 2 Answers ]
Should I drill then retap the threads? Thanks!
Removing mixet shower valve stem
[ 0 Answers ]
Hi, The Mixet valve in my shower stall needs replacement since turning the temperature control handle is very difficult. The valve stem will not pull out using max force with channel pliers (padded), I can turn the brass screw adjustor and out comes the front part but that leaves the rear...
Removing the Stem from the shower handle
[ 1 Answers ]
Model # A11.18.1M-Moen Do I need a special tool to remove it, to replace worn o rings?
Removing shower stem.
[ 3 Answers ]
Hello, I'm trying to replace the hot water and cold water shower stem to repair a leaky shower. I'm, however, learning it could be the diverter causing the leak. I don't care at this point; my goal is simply to remove the two stems (for hot and cold water) and replace them. The home is...
Removing stem bolts from tub faucets
[ 2 Answers ]
Good evening! I am trying to remove the bolts that hold the stems of the hot and cold water faucets on the tub. I'm using a cresent wrench and it's almost rounding the edges of the bolt. I've sprayed WD-40 in between the bolt and water pipes but they haven't budged yet... I'm trying to get the... View more questions Search
|