Ask Experts Questions for FREE Help !
Ask
    ekreitner's Avatar
    ekreitner Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 28, 2012, 11:32 PM
    Plumbing
    What the layout dimensions, for a toilet flange in Michigan, from back wall and adjacent.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    May 29, 2012, 07:03 AM
    12" from a unfinished wall to the center of the flange. 11` 1/2" from a finished wall. At least 15" to the nearest side wall. Does that answer your question? Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Plumbing [ 2 Answers ]

My kitchen sink faucet drips (had to remove the nozzle thing that added more pressure because it kept getting stopped up with grit)and now it leaks around the handle too. Is this expensive to have fixed or could I do it with a good "How to" manual?

Ppr plumbing vs cpvc plumbing [ 3 Answers ]

Ppr OR cpvc which one is better for residential plumbing

Plumbing [ 1 Answers ]

I have installed a underfloor heating system that is running off the tankless hot water system. The heating box is of the closed loop type. At the moment I have 5 zones being used from the manifold. The loops are from 200ft to 300ft. Of 1/2in pex. When running one zone, the shortest, the flow...

Correctional grade plumbing how different from commercial plumbing or residential [ 3 Answers ]

Just need a little information about the difference to answer a questioner .

View more questions Search