 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My fuse keeps blowing on my husqvarna riding mower
I have a husqvarna yth20k46 that has a 20amp fuse that keeps blowing when the mower tries to start... what is the fix
|
||||
|
|
|
||||
|
Hi,
Obviously a short pulling too much current through the fuse. Suspect the key switch first and then the solenoid. Could be a bare wire at or near either as well. Peace, Clarke |
||||
|
|
| Question Tools | Search this Question |
Check out some similar questions!
I have a 2 year old Husqvarna riding mower with a Briggs and Stratton engine. It ran fine until a couple of weeks ago when the engine started running rough and black smoke came out of the front of the mower. Thinking that maybe diesel fuel was put in it, I drained the tank and put in new gas and...
My dad gave me a wizard lawn riding mower,and what happen was that,he lost his key and then he tried to straight wire it,he said it sparked,and after then it keep blowing the fuse when I try to crank it.what could be my problem?
Fuse blows as soon as the switch is moved to the "on" position. There is a switch on the mower deck I unplugged and one on the clutch pedal that I unplugged individually and that did not help. The only items left are is a component below the switch that is between the positive terminal on the...
If I unplug the regulator it will run and not blow fuse but won't charge of course and when I plug the regulator back in it blows fuse. A local repair shop said it wouldn't be the regulator and I don't know cwhat else it could be'
I have a Husqvarna mower and am having an issue with the 20amp fuse blowing. I noticed that it's only after I turn the pto on. Originally I thought it was the electric clutch. So I disconnected it, turned the key on without starting it and turned the pto on. It worked. I inspected the wiring and...
View more questions Search
|
