Ask Experts Questions for FREE Help !
Ask
    kev15's Avatar
    kev15 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 28, 2012, 07:25 AM
    No hot water from my es650 state select hot water heater
    It seems like my thermostat will need to be replaced on the upper and lower. What tools will I need and how hard is it to do?
    Also, why would my thermostat go out when its only a 2004 (8 years old)?
    Thanks for your help - Kevin
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 28, 2012, 07:37 AM
    You first need to confirm power is reaching the stats, have you done that?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    May 28, 2012, 07:44 AM
    What tools will I need and how hard is it to do?
    After you address Bobs concerns. Just a screwdriver. Replace one wire at a time. Wire for wire.
    why would my thermostat go out when its only a 2004 (8 years old)?
    8 years is the recommended replacement time. I don't happen to agree. As long as the boiler don't leak everything else can be replace extending the life of the heater indefinably. I have a under the counter heater that was installed when the house was built in 1954. Good luck, Tom
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

State Select Hot water heater [ 9 Answers ]

I have a state select hot water heater. I am all of a sudden continuously hitting the reset button (in the hot water heater), any idea what is making this happen and can I replace the braker in the hot water heater. I am assuming it isn't the element because the water does get hot, that is until...

State Select Water Heater - Hot water not consistent [ 7 Answers ]

The water heater supplies hot water when first taking a shower, but the water cools significantly, and by the end of the 4 minute shower the water is barely warm. It didn't used to be this way, it used to supply hot water the entire time. What would cause this?

State Select hot water heater [ 3 Answers ]

The last couple of weeks I have had to reset the red button to get hot water. As soon as it is reset we have hot water. This morning no hot water. Same thing, I reset red botton and we have hot water. Do I need to replace the thermostat?

State Select hot water heater [ 4 Answers ]

I Have a 2006 State Select Hot Water Heater and the hot water is scalding hot, and my teperature settings I have 2 are set on low. There is a red reset button on the top thermostat that keeps poping so I have to reset it but the water still gets scalding hot. Is it the thermostat ? Or the heating...

State Select Hot Water Heater [ 1 Answers ]

We have a state select hot water heater that is 2 year old. The water started getting boiling hot. I went to Lowe's and bought a new thermostat that was universal. I installed it and all we had was ice cold water. I put the other one backon and the water gets boiling and trips breaker. What is...

View more questions Search