 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
3A Fuse on Control Board Keeps Blowing
After reading several posts, I checked the 2 wires going outside and found them to be fine. Replaced contacter, still blows fuse. Replaced 2 wires going outside just in case I missed something the first time, still blows fuse. Removed wires from contacter and does NOT blow fuse. What else am I missing?
|
||||
Check out some similar questions!
It is a 3A fuse on the control board, it blows 2 times when turning on the AC
Hello, I Am Having A Problem With My Carrier Weathermaker 8000 Air Conditioning. It Keeps Blowing The Fuse In The Circuit Board Inside The Furnace Unit. Yesterday I Checked The Wiring Inside The Thermostat Tightened A Couple Of Wires And The Unit Started ( Yea) But It Ran Continuously For...
Help! A/C unit went out last night. Opened inside unit up (Trane XE80) and pulled the 5 amp blade fuse on the control board and saw that it had blown. Replaced the 5 amp fuse, closed the panel, and the blower started. When I went to turn on the A/C, the 5 amp fuse blew again (and again). ...
I have a Bryant M/N 383KAV036070AGJA, S/N 3097A08913, Series G furnace with central air that is blowing the 3-amp fuse on the control board. The furnace has been serviced numerous times over the past two years for various problems by multiple service companies. The control board was even replaced...
Hi, I have a Carrier furnace 48GS-036090311TP with a Honeywell T8401C thermostat. I can run the fan on continuously but when I put the Heat to ON on the T-stat, the 5 Amp fuse on the control board (LH33WP003A) in the furnace blows. The sequence is like this: 1. Fan only operation is running...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
