Ask Experts Questions for FREE Help !
Ask
    genespleen's Avatar
    genespleen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 25, 2012, 09:50 AM
    Jumper setting -- control board
    Hi All,

    Can anyone tell me what the jumper settings in the phot below configure? The control board is a Nordyne 624690.

    Best wishes,
    David
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    May 25, 2012, 08:37 PM
    To me the setting looks good but then again I'm not sure what its operating and trying to do. Its hard to go wrong with a speed selection. If the blower is not strong enough step it up or if its to high step it down. Every system needs to be setup for duct system and life style of the home owner.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What jumper setting if O/B terminal is unused? Honeywell RTH2300 [ 0 Answers ]

Hi, I have purchased a Honeywell RTH2300 programmable thermostat. The installation instructions are pretty clear, but one question I do have concerns the JP2 jumper. The instructions previously say its okay to have only a 4-wire connection Y R G W. This is the set-up I seem to have, so...

How to get AV setting on a ECCO television without a remote control [ 1 Answers ]

I just need to know how to get my ECCO tv's AV setting because the remote doesn't work and it seems that you can only select the AV setting from the remote?

Control board [ 1 Answers ]

How hard is it to replace control board in carrier 58wav upflow? An where to find one?

Control board [ 4 Answers ]

I'm working on a forced hot air furnace that's in a basement that got flooded and the furnace was only on 2-4 so it looks like the whole blower motor and control board transformer got flooded. I responded to a no heat call today check the unit the unit won't do nothing, it has power coming from...

Habor Breeze remote control setting changes [ 3 Answers ]

I recently bought a home with two (2) Harbor Breeze ceiling fans with light - one in the dining room & one in the master bedroom. Both fans & lights turn on & off together from either room or remote control. When I turn the bedroom fan on, the dining room fan comes on at the same time even though...

View more questions Search