Ask Experts Questions for FREE Help !
Ask
    thewizardofahhs's Avatar
    thewizardofahhs Posts: 2, Reputation: 1
    New Member
     
    #1

    May 25, 2012, 12:35 AM
    1999 Murray Mower won't move. (Model 42504X99A or 42534A)
    Here's what I've done and checked: Both keys are I rear wheels. Transmission pully spins and is not slipping. When on jacks, the wheels move when in gear but just barely (I can stop them with my hand). When in gear it is hard to push the mower, but not in neutral.
    Belts appear to be OK. I took the tranny out, and spinning the pully by hand caused the axle to move without slipping, so I thought the tranny was OK. I reassembed but still no go.

Check out some similar questions!

Murray part number for spindle assembly for a model#42515x92B Murray mower [ 0 Answers ]

I need a Murray part number for spindle assembly for a model#42515X92B Murray mower

Murray lawn mower will not move [ 2 Answers ]

I had a flat tire and I removed the tire when I put it back on it would not move or go into gear. It would start and the blades would engage but not move. I took both tires off and one side would spin but not the other when in gear and of off the ground.

Murray Riding Mower won't move [ 10 Answers ]

My Murray Riding Mower is 7 yrs old. When I last started the mower it started but does not move forward or backward. Can anyone asvise what could be wrong, e.g. transmission and is it worth repairing, or could it be repaired.

Murray mower model 40631x8a [ 1 Answers ]

Can you please tell me what size tires both front and rear


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.