 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
16 hp Briggs vangard "bogs down" on me
My 54" scag walk behind begins to bog down/sputter/die after about 10 minutes of mowing. If I turn the PTO off it will run almost normal but still a little funny. If it cools it will Mow normal for another 10 minutes or so. I just cleaned the carb/replaced both coils (need to clean the areas to make sure they r connecting well still). Any suggestions? Thanks!
|
||||
Check out some similar questions!
Ok, this is going to be a long post/question, but necessary for everybody to get the whole picture. I purchased 3 (non working) identical 26HP briggs engines. The idea was to get them running, and sell 2 of them, getting the 3rd one free. They are intek 446777 overhead valve engines. I...
Both pictures have stickers on the back stating with a "certification seal" that the Picasso is a original etching and the Joan Miro is a lithograph. Moro looks real to me but I can't take the frames off to feel if the paint is real or maybe I don't know what a lithograph should feel like just a...
Hi All, Actually, I'm not very well in programming but a task is assigned to me related to .Net. Basically, there is a database in Microsoft Access. I have made forms in it which are based on queries to retrieve required results. I have also made graph of it. Now, I have to merge this...
My 25 HP Intek Twin Model 445777 Type 0134 engine with 47 hours, clean gas, oil and filters, started "racing," after one hour of mowing this week, blowing smoke. I've mowed three times this season; over one hour each with no problem. Choke now runs in "reverse," meaning that I have to push it all...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
