Ask Experts Questions for FREE Help !
Ask
    melf's Avatar
    melf Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 23, 2012, 08:31 AM
    Kenmore washer model number 110.4784292
    The plastic tube to the control switch to shut the water off has fallen off twice, causing a flood each time. Has anyone else had the same problem?
    I think this is a design/manufacture defect and Kenmore should be giving compensation.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    May 24, 2012, 12:01 AM
    Just cut the end off and put it back on. It won't slip off then.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove kenmore washer timer part no: 3356457 from washer model 110.92283100? [ 2 Answers ]

My kenmore washer model 110.92283100 does not advance to next function, it still do the work if I use my hand to turn to the next function. So I thought that my washer timer part number 3356457 is at fault. I have no instruction to remove the timer from its control panel and I do not want to break...

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

My kenmore washer model number 110.24422300 is not spinning on the spin cycle [ 0 Answers ]

My kenmore washer model number 110.24422300 is not spinning on the spin cycle. The water is draining but it is not spinning. It spins sometimes, but other times I spin it with my hand to get it started. Sometimes it works and sometimes it doesn't. It is making the noise like it is spinning, but...

Kenmore waher model number 110.45091400 [ 1 Answers ]

Washer displaces error code FDL and now doesn't start and only clicks and beeps what could be the problem good washer

Kenmore Washer Model #110.92293810 [ 1 Answers ]

Hi, I have a customer with a Kenmore Washer, 15 years old. I believe it has a three speed motor and deluxe inlet solenoids for all the dispensers. It fills fine, and washes fine, but when it gets to spin, the motor starts, stops, starts, stops and just keeps doing that. I have a sneaky...

View more questions Search