Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower head leaks when tub is filling?
[ 3 Answers ]
I ran the tub spout in wirsbo pex with four 90s but the shower head goes straight up with no fittings. Would it fix the problem to run the riser in 3/4 would it fix it? Would the area of a 3/4 pipe be enough to keep the water at bay? The pressure is at 40psi...
Shower head leaks when filling tub
[ 13 Answers ]
My shower head leaks water while water is coming out of the tub spout. It only leaks when the hot and cold water are mixing. It is a Moen valve. I have already replaced the cartridge and diverter- no change. Copper was not used for the riser, plastic tubing (peks?) was used- could this make a...
Water out of shower head when filling tub
[ 2 Answers ]
When I try to fill tub, water comes out of shower head. I thought the diverter was faulty so I took the spout and diverter off. Now, with only the 1/2" pipe coming out of wall I filled the tub again and water still comes out of shower head. Any advise would be helpful.:confused:
Shower leak when filling the tub
[ 9 Answers ]
We have a shower that leaks by when filling the tub. 1)I have replaced the diverter 3 times 2)Unscrewed the diverter and turned on the water 3) Tried a inline valve and also a shower head valve and they both leaked by 4) Replaced the mixing station behind the wall None of these stopped the...
Water out of shower head when filling tub
[ 3 Answers ]
We're in the process of renovating a bathroom and things are pretty close to being done, but we've noticed that that water comes out of the shower head when the tub is being filled. The set up is pretty simple... It starts with a thermostatic shower body (all fixtures by Paini - www.paini.it). The... View more questions Search
|