[Rapter1]

Thanks for the help

I have a SOLEX pump and it has a bronze screw on the left to the outlet but any way it worked

Luke from sri lanka

[speedball1]

Thanks for the help

i have a SOLEX pump and it has a bronze screw on the left to the outlet but any way it worked

Luke from sri lanka

Hi Luke and Welcome to The Plumbing Page. At AskMeHelpDesk.com. You're responding to a 5 year old dead thread so I gave you one of your own. Look in then upper left hand corner of the first post form the date in the first post before you post,



To prime a pump shut the pump off at the breaker box and look for a 1/4" plug or a gage on the top of the impeller cage. Remove it and fill the impeller cage until it runs over. Rewplace the plug or pressure gage and start the pump. This shou;ld get the prime back. If you can't fill the impeller cage to overflowing then you have a bad ckeck/foot valve. Good luck, tom