Ask Experts Questions for FREE Help !
Ask
    phillins's Avatar
    phillins Posts: 1, Reputation: 1
    New Member
     
    #1

    May 16, 2012, 02:02 AM
    Boiler problem
    Hi my boiler is a main combi 24 he and the flame failure light comes on will not reset, Then when or if I can get some water and heating it will only stay on for a short time and the flame failure light comes back on and shuts down

Check out some similar questions!

Smith GV100W Boiler ignition problem [ 0 Answers ]

I have a Smith GV100W propane furnace/boiler. It runs great, but have been having a sporadic problem. About once every week or two, the furnace does not properly ignite. The blower turns on and will keep running, but the ingnition sequence does not actually light the furnace. I usually don't...

Boiler shut down problem [ 0 Answers ]

I have rusty water leaking from the air valve and backflow preventer causing my boiler to shut down. Does anyone know how I can fix it. Thank you.

Weil mclain ultra boiler problem [ 0 Answers ]

My Ultra-155 locked out with a blower fault. If I remove the connector with the control signals the blower takes off. When I put it back in, the fan stops. My signals from the U-Control show blower out = 0 and RPM in = 0. V+ to V- is about 40 volts. Can this be fixed? If not is the problem...

Boiler problem--after topping up pressure [ 2 Answers ]

Hi all The pressure of my boiler dropped because I bled the radiators earlier today. I followed manual instructions to top up the pressure but the boiler still won't come on. Read somewhere that maybe it's because topping up pressure can bring air into the system? Any ideas on how to get...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.