Ask Experts Questions for FREE Help !
Ask
    LONDON10's Avatar
    LONDON10 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 13, 2012, 05:12 PM
    Avc-a3000 hitachi
    When we do a complete setup the words arial connection comes up so we pluged in another TV and it works OK we have a problem can you help please
    FadedMaster's Avatar
    FadedMaster Posts: 1,510, Reputation: 148
    Ultra Member
    		  
    #2

    May 13, 2012, 08:40 PM
    Do you have an antenna connected to the TV? If not, make sure you change to the proper input.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hitachi TV troubleshooting [ 0 Answers ]

Have hatachi TV model 35ux70b when first turning on TV set single horizontal line appears in the middle of the screen if you tap the side of the cabinet a couple times the picture appears and the set works perfectly.

Hitachi Plasma TV Model PD32-A3000/AVC-A3000 not working [ 2 Answers ]

Hi \r\nI have a Hitachi Plasma TV Model PD32-A3000/AVC-A3000. I cannot get a picture on the screen at all. It is just black. There is power supply going to the TV and to the AVC. However when I turn the AVC on from standby mode the light does not turn green either. The only thing I can do is...

My hitachi TV won't come on [ 1 Answers ]

I have a 43 inch hitachi TV and it will not come on, only makes the ticking noise like right when it comes on, before it stopped working there was a shadow on the left side of the screen also. Any help would be appreciated

Hitachi TV [ 1 Answers ]

Hello all, I'm trying to find a user's guide or a service manual for a Hitachi TV model number "CTZ7883B" or "CT27883B"" television. What I need to know is the IrF code set. Thanks, Don

View more questions Search