 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a new Briggs and Stratton Vanguard 16hp twin installed in an ATV. Unfortunately on a shakedown run the exhaust pipe loosened and fell on the wireing harness from the ignition key and the engine immediately stopped as the pipe melted through the wire insulation, I assume shorting something...
I have an 1998 Ingersoll 4016 with a 16 HP Vanguard engine. When I try to start it, it sounds and feels like the starter is spinning but not engaging the flywheel. I have not had any problems starting until now. It has about 220 hours.
Briggs and Stratton Vanguard 16 HP Vertical engine what is the push rod gap for intake and exust
Can someone tell me how to drain the oil on a Vanguard Briggs and Stratton 18 hp engine? I have located the drain plug but there is some kind of plastic fitting over it with a flip-off nozzle on the end as if this is where the oil drains. It does not appear that the plastic fitting comes off. So,...
I have a new Briggs and Stratton 8000 watt generator powered by a Vanguard 15 hp overhead valve engine.Since it came from the factory it has a popping sound from the muffler as it runs. It seems as though there is a misfire. The spark plug has been changed and the spark is in spec. Service dealers...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
