 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Battery is good and I have bypassed seat safety switch. I do have 12 volts at the ignition switch.
When I try to start my sears lawn tractor Model 917.2171080 it clicks the fuse is good, the battery is new how do I trouble shoot between starter and solenoid.
I have a Craftsman15.5 lawn tractor. The fly wheel would barely turn, then stopped totally. I replaced the 5 yr old battery, no luck. I replaced a 15 amp fuse that looked bad, no luck. The ammeter shows a draw when I turn the ignition, but nothing turns, no click even. I am suspecting the starter....
I have a sears lawn tractor 917.258660 that won't start. The solenoid justs clicks. I replaced the battery, but that didn't help. The jumped the battery directly to the starter and the engine turned over fine - so I think I eliminated the battery and the starter as the problem. I then put a...
Have seen multiple posts on this problem - each referencing checking the 3 safety switches. (when I try to start it sounds like the starter, starter checked out OK- sounds like it drags but won't start). Where are the 3 safety switches located and how do I check them ( explain simply since I'm a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
