Ask Experts Questions for FREE Help !
Ask
    Dripper's Avatar
    Dripper Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 5, 2007, 02:07 PM
    Kenmore Ultra Wash dishwasher
    My Kenmore Ultra Wash dishwasher will not drain when finished. What are my options?
    stew_1962's Avatar
    stew_1962 Posts: 255, Reputation: 10
    Full Member
    		  
    #2

    Mar 5, 2007, 08:06 PM
    Remove lower rack. There a strainer under there. Remove and clean.

    Make sure there is no other food debris under it.

    If that isn't it, then REMOVE POWER.

    Unhook drain line from under the sink and under the DW. See if it is clogged or the outlet is clogged.

    Otherwise, there is a problem inside the pump. You'll have to dismantle the pump housing to see what's up in there. Before you start this undertaking, you'll need replacement gaskets. This procedure is fairly complicated.

    Regards,
    Stew
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Ultra Wash Dishwasher [ 1 Answers ]

I have a Kenmore Ultra Wash dishwasher that is approximately 5 years old. About 3 weeks ago the lock light started blinking. I held the No Heat button for 4 seconds to unlock which it did, but still will not start. Now, the delay 2 hour light is constantly blinking and my dishwasher still...

Kenmore Ultra Wash dishwasher [ 2 Answers ]

I am looking for a user manual or simply some explanation as to the various controls on the Kenmore Ultra Wash dishwasher. It is an older model #110753613 Serial number FFA0404041 I have done a lot of searching on the net and the only thing I can find is that Kenmore will give you the user...

View more questions Search