Ask Experts Questions for FREE Help !
Ask
    mwodek12's Avatar
    mwodek12 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    May 9, 2012, 06:00 AM
    Kenmore elite 665.17469300 will not do anything & water is stiing in the tub... help?
    I have a Kenmore Elite 665.17469300 & it will not do anything. There also is water in the base of the tub that never drained out from the last cycle. It is 8 years old. Any ideas for me?
    mwodek12's Avatar
    mwodek12 Posts: 3, Reputation: 1
    New Member
    		  
    #2

    May 9, 2012, 06:02 AM
    Quote Originally Posted by mwodek12 View Post
    I have a Kenmore Elite 665.17469300 & it will not do anything. There also is water in the base of the tub that never drained out from the last cycle. It is 8 years old. Any ideas for me?
    I should have mentioned that none of the buttons will light up either. It is like it is totally dead.
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #3

    May 9, 2012, 06:35 AM
    Hi mwodek12 and welcome, I don't know that dishwasher, but have you checked the power going to the machine? Maybe someone will come along with a solution. Good luck
    mwodek12's Avatar
    mwodek12 Posts: 3, Reputation: 1
    New Member
    		  
    #4

    May 9, 2012, 06:46 AM
    Quote Originally Posted by parttime View Post
    Hi mwodek12 and welcome, I don't know that dishwasher, but have you checked the power going to the machine? Maybe someone will come along with a solution. good luck
    I have checked the outlet & it all seems to be good... thnx.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #5

    May 11, 2012, 06:26 AM
    You most likely have a bad door switch or the latch is not working right. Here is a manual to help: http://dl.dropbox.com/u/8010163/Whirlpool_Dishwasher_Service_manual.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite 665.1746 [ 0 Answers ]

Everyone says push the heat dry button. My model does not have a heat dry button. Does anybody know what order of buttons to press for model 665.1746? Thanks.

Model 665 1376 2K600 kenmore elite ultra wash dishwasher won't pump water [ 0 Answers ]

I have Model 665 1376 2K600 kenmore elite ultra wash dishwasher. When I press the start button I hear the pump start but no water enteres the washer. After a short time the washer stops and then tries again. I have verified that the water supply is available to the first component (looks like an...

Kenmore ultra was 665 water and soap leak out and remain in tub after wash cycle [ 1 Answers ]

My Kenmore Elite washer agitator spins while the tub is filling with water. Why? [ 0 Answers ]

My Kenmore Elite top load washer agitator immediately starts turning when the tub is filling up with water. It never did this prior, before the tub was full with water

Kenmore Elite 665 dishwasher [ 2 Answers ]

Quick Rinse button flashing

View more questions Search