Ask Experts Questions for FREE Help !
Ask
    xmxer's Avatar
    xmxer Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 4, 2007, 10:27 PM
    Floor Tile
    Has anyone ever had ceramic floor tile in a 20 in that was warped?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Mar 5, 2007, 08:19 AM
    I've laid 13 in tile and never ran into a "warped" tile in 25 cases. If you have one bad tile just set it aside. You might be able to use a small piece of it later in a corner or doorway.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tile leak from 3rd floor through 2nd floor ceiling (bath) [ 5 Answers ]

Hi All: We renovated our third floor bathroom which included stripping the floor down and installing tiles (1" squares within 1' blocks). After our 3rd floor tenant takes long showers we get some leakage through her floor and thusly through our ceiling (which we now have partially open to have...

Floor Tile, Concrete floor is sealed. [ 1 Answers ]

I want to replace carpet with tile on concrete floor but concrete is sealed with some coating. Do I have to prime this or remove sealant?

Sub-floor for Tile [ 1 Answers ]

I pulled up the linoleum in my bathroom and the sub flooring has water damage. It's pretty thick plywood. How do I pull that up? Its wedged in tight. I have a crowbar and it would be fun to use, but I don't want to ruin anything. The area is only about 5'x5'. It's in three sections. Can I...

Tile Bathroom Floor [ 4 Answers ]

Hi, my husband just recently Tiled our bathroom floor, and he just grouted the tile yesterday, how long will it need to dry before being able to get wet (like if we use the bathtub/shower) and also is it necessary to seal the grout? He says it's not but I have read on the internet otherwise? ...

Tile floor [ 1 Answers ]

Hi, I want to put a ceramic tile floor in the bathroom. Presently there is 5/8 inch pressedboard for flooring with 1/2 in plywood subfloor. Can I put down a 1/4 in backerboard and tile, or due I have to cut out the 1st level of pressed board ? Thanks Tim:confused:

View more questions Search