Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Why is the cold water line not filling my hot water tank ?
[ 5 Answers ]
The cold water supply valve to the water heater is open, but no water is flowing. I opened the drain valve on the heater and no water came out. Obviously it hasn't been filling for the past few days. I have plenty of cold water at all my faucets. I have shut off the breaker.
My fluidmaster tank will not fill and when I run water in the sink the tanks fill?
[ 1 Answers ]
My tank will not fill after flushing ( not the bowl) however when I run water into the sink it fills
Fluidmaster toilet fill valve 200 ax water level
[ 2 Answers ]
I'm installing a fluidmaster 200ax and lost the installation instructions, can't find them anywhere on the web, I got everything set up, all that is troubling me is adjusting water level, funny the box says "easy water leveling" but I can't find how to make it stop filling.
No water coming to toilet from wall. Fluidmaster okay.
[ 2 Answers ]
Yesterday, irrigation repair man turned off water to home. Afterwards, upstairs toilet would not fill with water. Detached metal flex tube to tank and turned on water @the wall. Still, no water came out. Sinks and shower working fine in that bathroom.
New Hot Water Heater Wire Panel Filling With Water From Tank
[ 2 Answers ]
I have recently installed a new electric hot water heater. I have connected all the wires properly, I have connected the piping in the correct manner, and filled the tank. I was about to flip my breaker to turn the water heater on, and noticed a little moister around the panel that the wires come... View more questions Search
|